B6AC 80W 6A Lipo NiMh Li-ion Ni-Cd AC/DC RC Balance Charger 10W Discharger for RC Car Helicopter Drone Airplane Battery
1 Balance charger: In balance charging mode, the voltage of different battery cells will be balanced, which could protect the battery and make sure fully charge.
2 Support multiple batteries: LiIon/LiPo/LiFe/NiCd/NiMh/Pb battery.
3 Various of charging mode: charging-auto, balance/fast charging, storage and cyclic charging etc.
4 Accept individual battery charging/discharging, so you can extend the scope of application of the charger, that is equally useful for the DIY battery.
5 Support AC 100-240V / DC 11-18V input, more conveniently to use.
1 This B6AC charger could charge LiIon/LiPo/LiFe/NiCd/NiMh/Pb batteries.
2 It could prevent the over-charging which may lead to an explosion due to the user’s fault, especially for lithium batteries.
Operating voltage range: DC 11.0-18.0 Volt / AC 100-240V 50/60 Hz
Circuit power: Max.charge power: 80W / Max.discharge power 10W
Charge current range: 0.1-6.0A
Discharge current range: 0.1-2.0A
Balance current: max.300mA
Balance tolerance: +/-0.01V
LiIon/LiPo/LiFe cells : 1-6 cells
NiCd/NiMH cells : 1-18 cells
Pb battery voltage: 2~24v
Item size: 133 * 142 * 40mm
Item weight: 478g
Package size: 21 * 17 * 5cm / 8.3 * 6.7 * 1.96in
Package weight: 628g / 1.38lb
1 x B6AC Battery Balance Charger
1 x Alligator Clip DC Input Cable
1 x T Plug Output Cable
1 x Glow Charging Cable
1 x T Plug to JST Plug Charging Cable
1 x T Plug to JR Plug Charging Cable
1 x T Plug to Alligator Clip Charging Cable
1 x English Manual